PRC-DeSoto Adhesion Promoters and Primers

PR142

PR-142 is an adhesion promoter to enhance the coupling characteristics of polysulfide compounds to a wide variety of substrates. PR-142 is a one part compound suitable for application by brush or clean gauze. The material dries at room temperature in approximately 30 minutes.


PR148

PR-148 is an adhesion promoter to enhance the coupling characteristics of polysulfide compounds to a wide variety of substrates. PR-148 is a one part compound suitable for application by brush or clean gauze. The material dries at room temperature in approximately 30 minutes.


PR182 Clear

PR-182 Clear is a water based, VOC compliant, adhesion promoter to enhance the coupling characteristics of polysulfide sealants to a wide variety of substrates. The material is specifically formulated as a safer alternative to organic solvent based products, thus eliminating the flammability, explosion and health hazards associated with such materials. PR-182 Clear is a one-part compound suitable for application by brush or clean gauze. The material dries at room temperature in approximately 30 minutes.


PR182 Pink

PR-182 Pink is a water based, VOC compliant, adhesion promoter to enhance the coupling characteristics of polysulfide sealants to a wide variety of substrates. This material is specifically formulated as a safer alternative to organic solvent based products, thus eliminating the flammability, explosion and health hazards associated with such materials. PR-182 Pink is a one part compound suitable for application by brush or clean gauze. The material dries at room temperature in approximately 30 minutes.


PR187

PR-187 is an adhesion promoter to enhance the coupling characteristics of polythioether compounds to a wide variety of substrates. This adhesion promoter is recommended when a PR-1800 polythioether sealant is to be applied over a polysulfide material. PR-187 is a one part compound suitable for application by brush or clean gauze. The material dries at room temperature in approximately 30 minutes.


PR1543

PR-1543 is an adhesion promoter to enhance the coupling characteristics of polyurethane compounds to polyvinyl chloride insulation. PR-1543 is a one part compound suitable for application by brush. The material dries at room temperature in approximately 30 minutes.


PR423

PR-423 is a waterborne, VOC compliant, epoxy primer to enhance the adhesion characteristics of polyurethane potting and molding compounds to steel and aluminum surfaces. The material cures to a durable coating with excellent resistance to solvents, hydraulic fluids and water. This material acts as an effective barrier against the common causes of corrosion on aluminum alloys or between dissimilar metals.


If you have any specific requirements not listed in this site, please contact our sales team for further information on +44 (0)870 800 55 25 or email us on sales@kemfast.com