3M Instant Adehsives

3M™ Scotch-Weld™ Instant Adhesive CA-7

Is economical to use because generally only drops of adhesive are needed. It has excellent adhesion to many metals, plastics and rubber. Meets MIL-A-46050C, Type I, Class 1.

3M™ Scotch-Weld™ Instant Adhesive CA-8

It is economical to use because only drops of adhesive are needed. It has excellent adhesion to many metals, plastics and rubber.It produces bonds with more shock resistance than many typical cyanoacrylate adhesives. Meets MIL-A-46050C, Type II, Class 2.

3M™ Scotch-Weld™ Instant Adhesive CA-9

It has a longer set rate. It is economical to use because generally only drops of adhesive are needed. Excellent adhesion to many metals, plastics and rubber. Meets MIL-A-46050C, Type II, Class 3.

3M™ Scotch-Weld™ Instant Adhesive CA-40H

Has particularly good adhesion to many difficult to bond substrates. Exhibits good resistance to soap solutions and isopropyl alcohol. It has high viscosity and slower set. Meets MIL-A-46050C, Type II, Class 3.

3M™ Scotch-Weld™ Instant Adhesive CA-100

It has relatively high viscosity allows gap-filling capacity up to .020 inches. It has high T-Peel strength, thermal shock resistance, impact resistance, excellent metal bonding capabilities. Meets MIL-A-46050C, Type II, Class 3.

3M™ Scotch-Weld™ Instant Adhesive Gel CA-50

The gel consistency allows it to be used in many non-sag vertical applications, and to fill gaps up to .020 inches. Its very slow cure rate allows maximum time to reposition parts.

3M™ Scotch-Weld™ Surface Activator

Surface activator for 3M Cyanoacrylate Adhesives primes and accelerates cure on surfaces which cyanoacrylate adhesives are unable to cure or cure too slowly.